In case you are seeing yellow or orange light on your Linksys Velop again and again, walk through this blog post once and know all the basic and advance troubleshooting methods to fix the issue in the twinkling of an eye. Continue reading!
Fix: Linksys Velop Linksys Velop Yellow or Orange Light Issue
Here, you will get to know several solutions to fix Linksys Velop yellow or orange light issue. Scroll down to read more!
Outdated Linksys Velop Firmware
On the off chance if you continue to avoid firmware update pop-ups of your Linksys Velop for a longer time, you may get stuck with yellow or orange light. Therefore, navigate to Linksys router login page using its default IP and check whether there is new firmware update available for your Velop.
Bonus Tip: Apart from that, users can also refer to the Linksys Velop manual for firmware update instructions.
Connectivity Issue
In the event that your existing modem/ router is not connected to the Linksys Velop, then also you may experience the yellow or orange light issue on the device. To fix the issue, turn off your Linksys Velop along with your existing modem/ router, wait for 5-10 minutes, and turn them on again. Once you’re done, make a secure connection between them using an Ethernet cable.
The Placement of Your Linksys Velop
If you have placed your Linksys Velop inside a cabinet or under a table, then it will not be able to receive constant WiFi signals from your existing modem/ router resulting in Linksys Velop yellow or orange light issue. Thus, to fix it, we suggest you place your Linksys Velop in a location in your home where it can receive uninterrupted WiFi signals from your modem/router.
In addition to that, it is also recommended to place your Linksys Velop away from corners and the reach of unknown WiFi networks. Doing so will also help you get Linksys Velop setup success.
Check the Ethernet Cable
If you are still facing the same issue, go through the steps highlighted below and get rid of Linksys Velop yellow or orange light issue:
- Check if the Ethernet cable you have used includes any cuts or not. If so, then it is suggested to replace it right away.
- If the Ethernet cable you are using is perfect, we suggest you connect your Linksys Velop and your existing modem/ router in a wireless manner.
Check the Power Supply
Rectify the issue by walking through the steps outlined underneath:
- Check if your Linksys Velop is getting steady power supply or not.
- Also, check whether the power adapter of your Linksys Velop is properly plugged in.
- Power cycle your Linksys Velop.
- Contact your Internet Service Provider and confirm whether all your internet bills are clear. Also, confirm if you are on an upgraded data plan or not.
Note: To get Linksys router setup success, all the fixes listed above are important.
Still Facing the Same Issue?
If you are experiencing the same issue even after following the troubleshooting tips mentioned in this post, then we suggest you to reset Linksys Velop back to the factory default settings. After resetting the device, perform the Linksys Velop setup process again to get uninterrupted internet access all over your home.
Want a device that covers the dead zones in your house? To revamp your WiFi experience to the fullest, add a Linksys WiFi range extender to your router/ modem. Just perform Linksys extender setup and see the difference. Adding a Linksys WiFi range extender to the Velop will help you fix many internet-related issues including yellow or orange light issue on your Velop.
Is the same issue spinning your head? Thus, rather than banging your head against a wall, it is always better to find a better deal with better option, what do you think? If you agree with us, then contact our experts via comments.
