Is the Netgear Nighthawk red light issue has become a headache for you? If so, then you are not alone struggling with the issue. Know that you don’t have to worry at all. We’ve got your back! When it comes to fixing the red light issue, a few troubleshooting tips can work. If you want to get rid of the Netgear Nighthawk router red light issue in an instant, then have a quick glance at the fixes given in this piece of writing and make your device up and running within minutes. Let’s take the plunge!
Before proceeding further with the troubleshooting tips, let’s have a quick glance at the reasons causing the red light issue.
Reasons Behind Netgear Nighthawk Red Light Issue
- Your Netgear Nighthawk router isn’t getting sufficient power supply.
- The power adapter of your Netgear Nighthawk router is not inserted properly into the wall outlet.
- The Ethernet cable/ wire used by you to connect your Netgear Nighthawk router and the modem is damaged or faulty.
- Your Netgear Nighthawk router’s firmware is corrupted.
- Although you have completed the Netgear Nighthawk setup process, yet it is not configured in a proper manner.
- Your Netgear Nighthawk router is placed in a corner or in the reach of neighboring WiFi networks.
These are a few possible reasons that are letting you experience red light issue on your Netgear Nighthawk router. Let’s dig a little deeper and get the solution to the Netgear Nighthawk router red light issue.
Troubleshoot Netgear Nighthawk Router Red Light Issue
Check the Ethernet Connection
Make sure that there is no loose or faulty Ethernet connection between your Nighthawk router and the modem. On the off chance, if you have connected your Nighthawk router and modem wirelessly, consider connecting them using an Ethernet cable.
Bear in mind that in a few cases, wireless connections are not able to give you the expected results.
Change the Location of Your Nighthawk Router
Yes, you read it right! Changing the location of your Netgear Nighthawk router can also fix the red light issue. No matter whether you have performed the Netgear WiFi router setup for any model, if your Nighthawk device is not placed within range of your existing modem, it will surely come up with the red light error. Besides, ensure that your Netgear Nighthawk router is not placed inside a cabinet or under a table.
Update Your Router’s Firmware
Another effective tip that you can try to fix the red light issue on your Netgear Nighthawk router is to update its firmware. Updating Netgear router’s firmware will fix the red light issue for you. For updating the device firmware, you can login to Nighthawk router and see if there is any latest firmware update available for your device to download.
Power Cycle Your Nighthawk Router
At times, due to a minor technical glitch in your Nighthawk device, you may bump the red light error. To get it fixed, power cycle your Nighthawk router by unplugging it from the wall outlet and plug it in again after a few minutes. Now, see whether the issue has been fixed for you or not.
Reset Your Netgear Nighthawk Router
Last but not the least, in the event that none of the tips listed above fixed the issue for you, consider resetting your Netgear Nighthawk router as the last resort. As soon as you are done with the reset process, set up your Nighthawk device again using the Netgear router app or routerlogin.net web address.
In this way, you can get rid of the Netgear Nighthawk router red light issue in no time. Still can’t? Don’t sweat over it! Our competent experts can help! Simply get in touch with our technical department and let them fix the issue for you.
